stair carpet tiles
stair carpet tiles
stair carpet tiles::You may want your room to have a new look, or just want to replace an old carpet.Although the prices of tiles are comparable to that of rolled carpet, you will save a fortune on the actual installation as you can do this yourself fairly easily.
Before you buy your chosen tile, take note of the length and width from the store.
Next, measure the length and width of each stair.
Finally, divide the stair width by the tile width and, once again, round to the whole number.
Multiply the two rounded figures and you have the number of tiles you will need.
This way you can easily replace any stained or damaged tiles in the future without having to find an exact match.
Remove the new tiles from their packing and allow it to adjust to room temperature for 24 hours, otherwise heat and humidity could ruin the fit of your tiles.
Step 3: making a template.
The easiest way to install a tile is to make a template of each step.
This will ensure a good fit and a neat cut.
Lay a long sheet of paper on the step.
Using the utility knife, carefully trim the sheet of paper so that any excess is cut off and the paper replicates your step.
Repeat this for the rise.
Place your cutting board on the floor then lay a sufficient number of facedown tiles on the cutting board and place one of the templates on top.
Cut around the template so your tiles follow the shape of the step.
Look at the pattern you are forming and check that it looks accomplished and professional.
Adjust fitting as necessary so the carpet tiles have a smooth and uniformed look.
Peel the backing from the adhesive back on the tile and lay the center of each tile on the step before working outwards.
Untidy edges at the top and bottom of the staircase can be tidied by trimming with a utility knife or adding a protective floor rail.
stair carpet tiles::So, can you use carpet tiles to carpet stairs stair
carpet tiles
Комментариев нет:
Отправить комментарий