пятница, 30 сентября 2011 г.

installing carpet pad::It is a great do it yourself project and can be completed usually over a weekend installing carpet pad

installing carpet pad

installing carpet pad

installing carpet pad

installing carpet pad::It is a great do it yourself project and can be completed usually over a weekend.
The first step you must take in your installation project is to measure your room and find out how much material you will need.
Most carpet is sold by the yard so you will need to find the square yardage of your room.
Measure the length of your room and then the width, multiply the totals together and then divide that number by nine.
This will give you the square yardage of your room.
Before you bring any materials into your room you must clean the surface you will be working on.
Scrape up any lose paint or compound that may leave a hump in your finished floor.
Vacuum up any lose scraps.
Removing any doors in your room is recommended to avoid frustration when working with your material.
Now you will install your tack strips.
Tack strips are strips of wood that have small teeth facing up to bite into the bottom of your carpet and hold it from shifting.
The strips will have preset nails sticking out of the face.
Position your strips a half inch away from the wall and drive the nails in.
The next step is to lay down the carpet pad.
Make sure before rolling out your pad that it will be running perpendicular to the direction you wish to install your carpet.
Roll the pad tight to the wall and put staples near your tack strips for added support.
installing carpet pad::During this process, carpet padding tends to get
overlooked or treated as an installing carpet pad

Комментариев нет:

Отправить комментарий